CPIM-Part-2 Exam Dumps - APICS CPIM Questions and Answers

The bullwhip effect is a supply chain phenomenon that causes fluctuations in demand to amplify as they move upstream, from the consumer to the retailer, to the distributor and then to the producer1. The bullwhip effect can result in inefficiencies and costs such as excess inventory, lost revenues, superfluous capacity and poor customer service1.

One of the activities that would be effective to mitigate the bullwhip effect is to reduce lead times, which are the time intervals between placing an order and receiving the goods2. Reducing lead times can help to reduce the uncertainty and variability in demand, as well as improve the responsiveness and flexibility of the supply chain2. By reducing lead times, the supply chain partners can order less frequently and in smaller quantities, while still meeting customer demand. This can reduce the need for safety stock, cycle stock and pipeline stock, and thus lower the inventory carrying costs and risks2.

The other options are not effective activities to mitigate the bullwhip effect. Implementing track and trace technology, which is a method for tracking the origin, history, location and status of a product or its parts throughout the supply chain3, may help to improve the visibility and transparency of the supply chain, but it may not reduce the demand fluctuations or inventory imbalances caused by the bullwhip effect. Using a push system, which is a production system where goods are produced based on forecasted demand rather than actual customer orders4, may increase the risk of overproduction or underproduction, as well as create more inventory and waste in the supply chain. Increasing inventory, which is the stock of goods or materials held by a company to meet customer demand5, may increase the inventory carrying costs and risks, as well as tie up cash flow and working capital.

References : Lead Time Reduction: Definition & Benefits; The bullwhip effect: causes, intensity, and mitigation - Academia.edu; What is Traceability in Supply Chain Management?; Push vs Pull System: What Is The Difference?; Inventory Definition.

 A production cell is a group of machines or workstations that are arranged in a layout that facilitates the flow of materials and work-in-progress in a manufacturing system. A production cell is usually designed to produce a family of products or services that have similar characteristics or requirements. A production cell is often based on the principles of lean manufacturing and group technology, which aim to eliminate waste and improve quality. When designing a production cell, the most important consideration is the flow of materials into the cell and sequencing of operations to minimize total cycle time. The flow of materials into the cell refers to the movement and direction of the raw materials, components, or modules that enter the cell for processing. The sequencing of operations refers to the order and arrangement of the machines or workstations that perform the processing steps within the cell. Minimizing total cycle time refers to reducing the time it takes to complete a product or service from start to finish. By considering these factors, a production cell can achieve high efficiency, flexibility, and productivity.

The other options are not the most important considerations when designing a production cell. The unit per hour requirement for the production cell to meet the sales forecast is not the most important consideration, as it is a result of the demand planning and capacity planning functions, which are separate from the production cell design. The unit per hour requirement indicates how many units of a product or service the production cell needs to produce in an hour to meet the expected customer demand. The output rate for the first operation and move time after the last workstation are not the most important considerations, as they are only parts of the total cycle time calculation, which also includes the processing time and waiting time for each operation. The output rate for the first operation is the number of units that the first machine or workstation in the cell can produce in an hour. The move time after the last workstation is the time it takes to transport the finished product or service from the last machine or workstation in the cell to the next stage or destination. The take time requirement for each operator to meet the monthly production goals of the plant is not the most important consideration, as it is a measure of labor productivity, which is affected by factors such as skill, training, motivation, and supervision. The take time requirement for each operator is the amount of time that an operator needs to complete one unit of a product or service. References: CPIM Exam Content Manual Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section 6.2: Detailed Scheduling Methods, p. 38; Cellular manufacturing; Production Cell.

 The approved output of the distribution requirements planning (DRP) process is an input to the master production planning (MPS) process. The DRP process determines the quantity and timing of finished goods to be delivered to each distribution center or warehouse to meet customer demand1. The output of the DRP process is a distribution schedule that specifies the planned delivery dates and quantities of products2. The distribution schedule is then used as an input to the MPS process, which determines the quantity and timing of end items to be produced at each manufacturing facility3. The MPS process balances the demand from the distribution schedule with the available capacity and resources of the production system3. The output of the MPS process is a master production schedule that specifies the planned production dates and quantities of end items3.

References: CPIM Part 2 Exam Content Manual, Domain 4: Plan and Manage Supply, Section 4.1: Supply Management Concepts and Tools, p. 33-34.

Point-of-use storage is a stock location system that places inventory close to where it is needed in the production process, reducing transportation and handling costs and improving efficiency. It is often used in repetitive manufacturing, lean environment, where the demand is stable and predictable, and the inventory is replenished frequently. Fixed location and central storage are stock location systems that store inventory in a designated area, which may require more space and movement. Floating location is a stock location system that assigns inventory to any available space, which may cause confusion and inefficiency. References: CPIM Exam Content Manual Version 7.0, Domain 5: Plan and Manage Inventory, Section 5.2: Inventory Management Methods, p. 32.

Return on investment (ROI) is a financial ratio that measures the profitability of an investment relative to its cost. ROI is calculated by dividing the net income (or profit) generated by the investment by the total cost of the investment. ROI is decreased by any activity that reduces the net income or increases the cost of the investment. Increasing cost of sales is an activity that decreases ROI because it reduces the net income generated by the sales revenue. Cost of sales (or cost of goods sold) is the direct cost of producing or purchasing the goods or services sold by an organization. Cost of sales includes materials, labor, and overhead costs. Increasing cost of sales means that the organization spends more money to produce or acquire the same amount of goods or services, which lowers its profit margin and ROI.

References: CPIM Exam Content Manual Version 7.0, Domain 8: Manage Quality, Continuous Improvement, and Technology, Section 8.1: Develop Quality and Continuous Improvement Plans, Subsection 8.1.2: Describe how to develop a business case for quality and continuous improvement initiatives (page 74).