Weekend Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: Board70

830-01 Exam Dumps - Riverbed RCPE-CP-WO Questions and Answers

Question # 4

It is not recommended to use the same Steelhead appliance to optimize both replication traffic and general user traffic because:

Options:

A.

Replication traffic uses 16 KB blocks and causes fragmentation in the datastore

B.

User traffic may contain sensitive traffic and should not be mixed with other traffic

C.

Replication traffic may cause admission control therefore affecting user traffic

D.

The traffic pattern between the two types of traffic is generally very different and therefore the datastore may wrap more quickly affecting performance

Buy Now
Question # 5

Select the command needed to add support for virtual in-path to your Steelhead appliance so that you can use WCCP or PBR with a Steelhead appliance.

Options:

A.

in-path inpath0_0 enable

B.

in-path oop enable

C.

ip virtual enable

D.

in-path virtual enable

E.

in-path wccp_pbr enable

Buy Now
Question # 6

You have just completed upgrading the software version on your SteelCentral Controller for SteelHead Mobile. What will happen to the software on the SteelHead Mobile clients?

Options:

A.

The administrator must disconnect all clients and reinstall the software.

B.

They will stop optimizing they have upgraded.

C.

Nothing can happen until the administrator selects the new version in Manage > Assignments, Group Assignments.

D.

They will be upgraded automatically when they next connect.

Buy Now
Question # 7

-- Exhibit –

-- Exhibit --

Refer to the exhibit. When USER1 tried to map shares to Server 1 and Server 2, he got the results shown. What does the report represent? (Select 2)

Options:

A.

The connection to Server 2 is optimized. The performance should be good.

B.

The connection to Server 2 is optimized, with errors, the performance should be poor.

C.

The connection to Server 1 is optimized. The performance should be good.

D.

The connection to Server 1 is optimized, with errors, the performance should be poor.

E.

The connection to Server 1 is not being optimized.

Buy Now
Question # 8

In an in-path deployment, if a naked SYN packet arrives on the WAN interface of Steelhead, what probe option is added to this SYN packet for auto-discovery?

Options:

A.

Option-76

B.

Option-78

C.

SACK

D.

WSCALE

E.

None of the above

Buy Now
Question # 9

Refer to the exhibit.

The customer would like to prevent a “black-holing” situation when using PBR when SH11 goes down. The Steelhead appliances are directly connected to the routers. What options are available to determine state level status of the Steelhead appliance? (Select 3)

Options:

A.

CDP

B.

NBAR

C.

Interface Tracking

D.

HTTP

E.

ICMP

Buy Now
Question # 10

To prevent possible denial of service attack, such as TCP SYN flooding, which of the following features could be used?

Options:

A.

No TCP SYN Flooding

B.

Connection limit per source IP

C.

Limit UDP traffic

D.

Run Deep Packet Inspection on all traffic

E.

Run Deep Packet Inspection on TCP traffic only

Buy Now
Question # 11

Simplified routing learns to associate MAC addresses to IP addresses by: (Select 2)

Options:

A.

Tracking destination IP addresses and matching them to the correct MAC address

B.

Tracking source IP addresses and matching them to the correct MAC address

C.

Tracking ARP requests sent by surrounding routers

D.

Tracking ARP requests sent by surrounding switches

Buy Now
Question # 12

In the exhibit,

there is a resident firewall inside the WAN cloud that drops packets with any TCP option. The customer allows you to use fixed-target rules instead. The firewall policy can only allow unassigned ports 7750-7751 to pass-through it. Additionally, the SH3 has been configured with service port 7750, while SH4 has been configured with service port 7751. Which of the following fixed-target rule specification is correct?

Options:

A.

The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7800. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7800.

B.

The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7810. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7810.

C.

The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750.

D.

The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7751. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750.

E.

The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7751.

Buy Now
Question # 13

Which of the following IP addressable interfaces can be connected for management purposes?

1) WAN

2) LAN

3) Primary

4) AUX

5) In-path

Options:

A.

1, 2, 3

B.

3, 4, 5

C.

1, 2, 4

D.

1, 2, 3, 4

E.

1, 2, 3, 4, 5

Buy Now
Exam Code: 830-01
Exam Name: RCPE Certified Professional WAN Optimization
Last Update: Feb 21, 2025
Questions: 402
830-01 pdf

830-01 PDF

$25.5  $84.99
 Add to Cart
830-01 Engine

830-01 Testing Engine

$28.5  $94.99
 Add to Cart
830-01 PDF + Engine

830-01 PDF + Testing Engine

$40.5  $134.99
 Add to Cart