212-82 Exam Dumps - ECCouncil Cyber Technician (CCT) Questions and Answers

The use of authorized RTU and PLC commands is the security control implemented by Hayes in the above scenario. RTU (Remote Terminal Unit) and PLC (Programmable Logic Controller) are devices that control and monitor industrial processes, such as power generation, water treatment, oil and gas production, etc. RTU and PLC commands are instructions that are sent from a master station to a slave station to perform certain actions or request certain data. The use of authorized RTU and PLC commands is a security control that fortifies the IDMZ (Industrial Demilitarized Zone) against cyber-attacks by ensuring that only valid and authenticated commands are executed by the RTU and PLC devices. Point-to-point communication is a communication method that establishes a direct connection between two endpoints. MAC authentication is an authentication method that verifies the MAC (Media Access Control) address of a device before granting access to a network. Anti-DoS solution is asecurity solution that protects a network from DoS (Denial-of-Service) attacks by filtering or blocking malicious traffic.

The correct answer is A, as it identifies the type of Internet access policy implemented by Ashton in the above scenario. An Internet access policy is a set of rules and guidelines that defines how an organization’s employees or members can use the Internet and what types of websites or services they can access. There are different types of Internet access policies, such as:

Paranoid policy: This type of policy forbids everything and imposes strict restrictions on all company computers, whether it is system or network usage. This policy is suitable for organizations that deal with highly sensitive or classified information and have a high level of security and compliance requirements.

Prudent policy: This type of policy allows some things and blocks others and imposes moderate restrictions on company computers, depending on the role and responsibility of the user. This policy is suitable for organizations that deal with confidential or proprietary information and have a medium level of security and compliance requirements.

Permissive policy: This type of policy allows most things and blocks few and imposes minimal restrictions on company computers, as long as the user does not violate any laws or regulations. This policy is suitable for organizations that deal with public or general information and have a low level of security and compliance requirements.

Promiscuous policy: This type of policy allows everything and blocks nothing and imposes no restrictions on company computers, regardless of the user’s role or responsibility. This policy is suitable for organizations that have no security or compliance requirements and trust their employees or members to use the Internet responsibly.

In the above scenario, Ashton implemented a paranoid policy that forbids everything and imposes strict restrictions on all company computers, whether it is system or network usage. Option B is incorrect, as it does not identify the type of Internet access policy implemented by Ashton in the above scenario. A prudent policy allows some things and blocks others and imposes moderate restrictions on company computers, depending on the role and responsibility of the user. In the above scenario, Ashton did not implement a prudent policy, but a paranoid policy. Option C is incorrect, as it does not identify the type of Internet access policy implemented by Ashton in the above scenario. A permissive policy allows most things and blocks few and imposes minimal restrictions on company computers, as long as the user does not violate any laws or regulations. In the above scenario, Ashton did not implement a permissive policy, but a paranoid policy. Option D is incorrect, as it does not identify the type of Internet access policy implemented by Ashton in the above scenario. A promiscuous policy allows everything and blocks nothing and imposes no restrictions on company computers, regardless of the user’s role or responsibility. In the above scenario, Ashton did not implement a promiscuous policy, but a paranoid policy.

References: , Section 6.2

The number of files in the “Sensitive Corporate Documents” folder is 4. This can be verified by initiating a remote connection to the target machine from the “Attacker Machine-1” using Theef client. Theef is a Remote Access Trojan (RAT) that allows an attacker to remotely control a victim’s machine and perform various malicious activities. To connect to the target machine using Theef client, one can follow these steps:

Launch Theef client from Z:\CCT-Tools\CCT Module 01 Information Security Threats and Vulnerabilities\Remote Access Trojans (RAT)\Theef on the “Attacker Machine-1”.

Enter the IP address of the target machine (20.20.10.26) and click on Connect.

Wait for a few seconds until a connection is established and a message box appears saying “Connection Successful”.

Click on OK to close the message box and access the remote desktop of the target machine.

Navigate to the Documents directory and locate the “Sensitive Corporate Documents” folder.

Open the folder and count the number of files in it. The screenshot below shows an example of performing these steps: References: [Theef Client Tutorial], [Screenshot of Theef client showing remote desktop and folder]

The loT device sent the command Temp_High over the network, which indicates that the temperature in the hospital was above the threshold level. This can be verified by analyzing the loTdeviceTraffic.pcapng file using a network protocol analyzer tool such as Wireshark4. The command Temp_High can be seen in the data field of the UDP packet sent from the loT device (192.168.0.10) to the server (192.168.0.1) at 12:00:03. The screenshot below shows the packet details5: References: Wireshark User’s Guide, [loTdeviceTraffic.pcapng]

Obfuscating is the technique used by Kevin to evade the IDS system in the above scenario. Obfuscating is a technique that involves encoding or modifying packets or data with various methods or characters to make them unreadable or unrecognizable by an IDS (Intrusion Detection System). Obfuscating can be used to bypass or evade an IDS system that relies on signatures or patterns to detect malicious activities. Obfuscating can include encoding packets with Unicode characters, which are characters that can represent various languages and symbols. The IDS system cannot recognize the packet, but the target web server can decode them and execute them normally. Desynchronization is a technique that involves creating discrepancies or inconsistencies between the state of a connection as seen by an IDS system and the state of a connection as seen by the end hosts. Desynchronization can be used to bypass or evade an IDS system that relies on stateful inspection to track and analyze connections. Desynchronization can include sending packets with invalid sequence numbers, which are numbers that indicate the order of packets in a connection. Session splicing is a technique that involves splitting or dividing packets or data into smaller fragments or segmentsto make them harder to detect by an IDS system. Session splicing can be used to bypass or evade an IDS system that relies on packet size or content to detect malicious activities. Session splicing can include sending packets with small MTU (Maximum Transmission Unit) values, which are values that indicate the maximum size of packets that can be transmitted over a network. An urgency flag is a flag in the TCP (Transmission Control Protocol) header that indicates that the data in the packet is urgent and should be processed immediately by the receiver. An urgency flag is not a technique to evade an IDS system, but it can be used to trigger an IDS system to generate an alert or a response.

Statistics is the Wireshark menu selected by Zayn in this scenario. Statistics is a Wireshark menu that provides a summary of captured packets, IO graphs, and flow graphs. Statistics can be used to analyze various aspects of network traffic, such as protocols, endpoints, conversations, or packet lengths3.

References: Wireshark Statistics Menu

Hardware-assisted virtualization is a virtualization approach in which the guest OS will not be aware that it is running in a virtualized environment. The virtual machine manager (VMM) willdirectly interact with the computer hardware, translate commands to binary instructions, and forward them to the host OS. Hardware-assisted virtualization relies on special hardware features in the CPU and chipset to create and manage virtual machines efficiently and securely34. Full virtualization is a virtualization approach in which the guest OS will not be aware that it is running in a virtualized environment, but the VMM will run in software and emulate all the hardware resources for each virtual machine5. Hybrid virtualization is a virtualization approach that combines hardware-assisted and full virtualization techniques to optimize performance and compatibility6. OS-assisted virtualization is a virtualization approach in which the guest OS will be modified to run in a virtualized environment and cooperate with the VMM to access the hardware resources

Inclusion of Diverse Perspectives:

Involving stakeholders in policy formulation ensures that the security policy considers the diverse needs and perspectives of different departments and employees across NexusCorp’s complex organizational structure.

A cloud auditor is a role played by Walker in the above scenario. A cloud auditor is a third party who examines controls of cloud computing service providers. Cloud auditor performs an audit to verify compliance with the standards and expressed his opinion through a report89. A cloud provider is an entity that provides cloud services, such as infrastructure, platform, or software, to cloud consumers10. A cloud carrier is an entity that provides connectivity and transport of cloud services between cloud providers and cloud consumers10. A cloud consumer is an entity that uses cloud services for its own purposes or on behalf of another entity

For NexaCorp to effectively monitor and analyze system logs, implementing a Security Information and Event Management (SIEM) system is the optimal approach:

SIEM Overview: SIEM systems collect, normalize, and analyze log data from various sources in real-time.

Benefits:

Centralization: Aggregates logs from all systems into a single platform.

Correlation: Identifies patterns and correlates events from different sources to detect anomalies.

Implementation Steps:

Select a SIEM Solution: Choose a suitable SIEM tool (e.g., Splunk, ELK Stack, QRadar).

Integration: Configure the SIEM to collect logs from all relevant systems.

Alerting and Reporting: Set up alerts for suspicious activities and generate periodic reports.

References:

SIEM Basics: Link

Implementing SIEM: Link