SK0-005 VCE Exam Download

A MD5 checksum is a value that is calculated from a file using a cryptographic hash function. A MD5 checksum is used to verify the integrity of a file by comparing it with the original value provided by the manufacturer or the source. If the MD5 checksums match, it means that the file is authentic and has not been corrupted or tampered with. If the MD5 checksums do not match, it means that the file is potentially corrupt or malicious and should not be installed12. A DLF configuration (A) is a setting that determines how a dynamic link library (DLL) is loaded into memory and executed by an application. A DLF configuration does not check the integrity of a file. A MBR failure (B) is a problem that occurs when the master boot record (MBR) of a disk is damaged or corrupted, preventing the system from booting. A MBR failure does not check the integrity of a file. ECC support © is a feature that enables error-correcting code (ECC) memory to detect and correct data errors in RAM. ECC support does not check the integrity of a file. References: 1 https://www.comparitech.com/net-admin/file-integrity-monitoring-tools/  2 https://csrc.nist.gov/CSRC/media/Presentations/Firmware-Integrity-Verification-Monitoring-and-Re/images-media/day2_demonstration_330-420.pdf

RAID 6 is a type of RAID that uses block-level striping with two parity blocks distributed across all member disks. It allows for two disk failures within the RAID set before any data is lost1. A minimum of four disks is required to create RAID 61. To increase the size of an existing RAID 6 array, the administrator can replace the array drives one at a time with larger drives and then expand the array. This way, the data and parity are rebuilt on each new drive and the array remains operational during the process2.

The RAID level that should be implemented to maximize usable capacity without requiring redundancy is RAID 0. RAID (Redundant Array of Independent Disks) is a technology that combines multiple physical disks into a logical unit that provides improved performance, reliability, or both. RAID 0 is a RAID level that splits data evenly across two or more disks without parity or mirroring. RAID 0 does not provide any redundancy or fault tolerance, but it increases usable capacity and performance by allowing parallel read and write operations.

References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 1, Lesson 1.2, Objective 1.2

RAID (Redundant Array of Independent Disks) is a technology that combines multiple hard drives into a logical unit that provides improved performance, reliability, or capacity. RAID can be implemented by hardware, software, or a combination of both. Hardware RAID uses a dedicated controller to manage the RAID array, while software RAID uses the operating system or a driver to do the same1.

In this scenario, the technician noted that the RAID hard drives were functional while troubleshooting a motherboard failure. This means that the data on the drives was not corrupted or lost. However, the technician installed a spare motherboard with similar specifications and used the original components. This means that the new motherboard may not have the same RAID configuration as the old one, or it may not recognize the existing RAID array at all. Therefore, the technician needs to reconfigure the RAID in order to restore operations with minimal downtime.