Selected XK0-005 Linux+ Questions Answers

The command restorecon -R -v /var/www/html will best resolve the issue. The issue is caused by the incorrect SELinux context of the web server files under the /var/www/html directory. The output of ls -Z /var/www/html shows that the files have the type user_home_t, which is not allowed for web content. The command restorecon restores the default SELinux context of files based on the policy rules. The options -R and -v are used to apply the command recursively and verbosely. This command will change the type of the files to httpd_sys_content_t, which is the correct type for web content. This will allow the web server to access the files and serve the pages to the browser. The other options are incorrect because they either disable SELinux entirely (sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config or setenforce 0), which is not a good security practice, or enable an unnecessary boolean (setsebool -P httpd_can_network_connect_db on), which is not related to the issue. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 535.

The parameter net.ipv4.ip_forward=1 will accomplish the goal of setting up a new Linux server as a router. This parameter enables the IP forwarding feature, which allows the server to forward packets between different network interfaces. This is necessary for a router to route traffic between different networks. The parameter can be set in the /etc/sysctl.conf file or by using the sysctl command. This is the correct parameter to use to accomplish the goal. The other options are incorrect because they either do not exist (net.ipv4.ip_forwarding or net.ipv4.ip_route) or do not enable IP forwarding (net.ipv4.ip_forward=0). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 382.

The mount /dev/sdb1 /media/usb command will mount the USB drive to /media/usb. This command will attach the filesystem on the first partition of the USB drive (/dev/sdb1) to the mount point /media/usb, making it accessible to the system. The mount /dev/sdb0 /media/usb command is invalid, as there is no such device as /dev/sdb0. The mount /dev/sdb /media/usb command is incorrect, as it will try to mount the entire USB drive instead of its partition, which may cause errors or data loss. The mount -t usb /dev/sdb1 /media/usb command is incorrect, as usb is not a valid filesystem type for mount. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Disk Storage, page 455.