Pearson SK0-005 New Attempt

A warm site is a type of disaster recovery site that has some pre-installed hardware, software, and network connections, but not as much as a hot site. A warm site also has some backup data, but not as current as a hot site. A warm site requires some time and effort to become fully operational in the event of a disaster. A hot site is a disaster recovery site that has all infrastructure and live data, and can take over the primary site’s operations immediately. A cold site is a disaster recovery site that has no infrastructure or data, and requires significant time and resources to set up. References:

https://www.enterprisestorageforum.com/management/disaster-recovery-site/

https://www.techopedia.com/definition/3780/warm-site

This is the best description of a hybrid cloud model because it combines both private and public cloud resources. A private cloud is a cloud environment that is owned and operated by a single organization and hosted in its own data center. A public cloud is a cloud environment that is owned and operated by a third-party provider and hosted in its data center. A hybrid cloud allows an organization to leverage both types of cloud resources depending on its needs and preferences. References: https://azure.microsoft.com/en-us/overview/what-is-hybrid-cloud-computing/

The best way to accomplish the department’s goals is to transfer the existing data to an external eSATA enclosure, which is a device that connects an external hard drive to a computer using an eSATA port. This will allow the accounting department to retain the current data for quick read-write access, as eSATA provides high-speed data transfer rates and supports hot-plugging. Unlike USB 3.0, eSATA does not share bandwidth with other devices, which can improve performance and reliability. Verified References: [eSATA vs USB 3.0]

The most likely cause of the internet issue is B. The DHCP scope is full.

A DHCP scope is a range of IP addresses that a DHCP server can assign to DHCP clients on a network. A DHCP scope has a start address and an end address, and it can also have some excluded addresses that are not available for lease. A DHCP scope can have various options, such as subnet mask, default gateway, DNS server, etc., that are applied to the DHCP clients along with the IP address. A DHCP scope also has a lease time, which is the duration that a DHCP client can use an IP address before renewing it or releasing it. A DHCP scope can have reservations, which are fixed IP addresses that are assigned to specific DHCP clients based on their MAC addresses12

If a DHCP scope is full, it means that there are no more IP addresses available for lease in the scope. This can happen if the number of DHCP clients exceeds the number of IP addresses in the scope, or if the lease time is too long and the IP addresses are not released or reused frequently enough. If a DHCP scope is full, any new or existing DHCP clients that request an IP address from the DHCP server will not receive one, and they will not be able to access the network or the internet12

In this scenario, users are able to connect to the wireless network, but they are unable to access the internet. The network administrator verifies connectivity to all network devices, and there are no ISP outages. The server administrator removes the old address leases from the active leases pool, which allows users to access the internet. This indicates that the DHCP scope is full, and that removing the old leases frees up some IP addresses for lease in the scope. Therefore, option B is the most likely cause of the internet issue.