Passed Exam Today SK0-005

A faulty PSU needs replacement, and the management team wants a solution to prevent future downtime.

Solution: Implement redundancy (Option D):

Redundant power supplies ensure that if one fails, the other takes over seamlessly.

Separate circuits, load balancing, and server monitoring are important but do not directly prevent PSU failures.

Load balancing is a method used to distribute incoming network traffic across multiple servers. In this scenario, the administrator is tasked with ensuring that all four servers can serve the same website, which is a typical use case for load balancing.

Load balancing (Answer A): Distributes web traffic across multiple servers to ensure availability and reliability.

Direct access (Option B): Refers to client devices connecting directly to a network resource, unrelated to the described scenario.

Overprovisioning (Option C): Refers to allocating more resources than are currently needed, not relevant to load distribution.

Network teaming (Option D): Involves combining multiple network interfaces for redundancy or increased throughput but doesn't address server distribution.

CompTIA Server+ Reference:This topic is covered under SK0-005 Objective 1.4: Explain networking concepts for server environments.

When new RAID controllers are installed and disks go missing, the first logical step is to reboot to the RAID controller BIOS and rescan for attached disks and arrays (Answer A). This will allow the RAID controller to detect the connected drives and rebuild the RAID configuration as expected.

Rebooting to RAID controller BIOS (Answer A): This step ensures that all the attached disks and arrays are properly detected and mapped to the RAID configuration.

Checking UEFI settings (Option B): This might be useful later, but initially, the RAID controller BIOS should be checked first to verify disk detection.

Turning off external arrays (Option C): While this could be helpful in some scenarios, it's not the most efficient first step.

Checking cables (Option D): This could be necessary, but since the controllers were just replaced, software/BIOS configurations should be checked first.

CompTIA Server+ Reference:This topic relates to SK0-005 Objective 3.1: Install and configure server components.

A warm site is a backup site that has some of the necessary hardware, software, and network resources to resume operations, but not all of them. A warm site requires some time and effort to become fully operational. A warm site is different from a cold site, which has minimal or no resources, and a hot site, which has all the resources and is ready to take over immediately.

References: CompTIA Server+ Study Guide, Chapter 10: Disaster Recovery, page 403.