Pass Using LEED-Green-Associate Exam Dumps

Potable water is water that is suitable for drinking. Potable water meets or exceeds the Environmental Protection Agency’s (EPA) drinking water quality standards and is free of contaminants that are harmful to human health. The other options are not suitable for drinking. Graywater is wastewater from sinks, showers, and laundry that can be reused for non-potable purposes such as toilet flushing and irrigation. Greenwater is rainwater that is collected and stored for non-potable uses. Stormwater is runoff from precipitation that can carry pollutants and sediments into waterways. References: LEED Green Associate Candidate Handbook, page 26; USGBC, [Water Efficiency], page 2.

According to the LEED v4 Minimum Program Requirements (MPRs), there is no minimum required number of occupants or full-time equivalents (FTEs) for which a building must be designed to be considered eligible to pursue certification1. However, the project must serve at least one FTE, which is based on an 8-hour day2. The other options are not part of the MPRs.

References:

Minimum Program Requirements (MPRs) - U.S. Green Building Council1

LEED 101: MPRs (Minimum Program Requirements)2

 Volatile organic compounds (VOCs) are compounds that have a high vapor pressure and low water solubility, and are emitted as gases from certain solids or liquids1. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects2. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors2. VOCs are emitted by a wide array of products, such as paints, solvents, cleaners, fuels, pesticides, building materials, office equipment, etc2. Breathing VOCs can irritate the eyes, nose and throat, can cause difficulty breathing and nausea, and can damage the central nervous system and other organs3. Some VOCs can cause cancer3. Therefore, VOCs negatively impact the quality of indoor air, which is option B.

An integrative design process is a collaborative and holistic approach that involves the project team and stakeholders from the early stages of the project to identify the project goals, analyze the site and climate conditions, explore multiple design options, and optimize the performance and cost-effectiveness of the project. By applying an integrative design process, a LEED project can achieve higher levels of sustainability and efficiency, as well as reduce the risks of errors, delays, and change orders12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2