NS0-162 Exam Results

 The number of ISCSI LIFs that will be created from the SVM setup wizard, as shown in the exhibit, is 16. This is because the LIFs per node field is set to 2, and there are 4 nodes in the cluster. Therefore, the total number of LIFs is 2 x 4 8 for each SVM, and since there are two SVMs, the total number of LIFs is 8 x 2 16. The other options are incorrect because they do not match the calculation based on the exhibit. References :- Configure an SVM for iSCSI, Configure iSCSI on an existing SVM

 You can use either XCP or the in-place conversion feature to move data from a FlexVol volume to a FlexGroup volume. XCP is a data migration tool that can copy data between different types of volumes, such as FlexVol and FlexGroup. The in-place conversion feature, introduced in ONTAP 9.7, allows you to convert a FlexVol volume to a FlexGroup volume without requiring a data copy or additional disk space. However, you cannot convert a FlexGroup volume back to a FlexVol volume. SnapMirror is not a valid option for this scenario, because it does not support replicating data from FlexVol to FlexGroup volumes. A FlexVol to FlexGroup conversion is supported, but only for transitioned volumes starting from ONTAP 9.8. References :- Converting FlexVol volumes to FlexGroup volumes overview, Can a FlexGroup be converted to a FlexVol?, Can I convert a Flexvol to FlexGroup without rewarming the tiered data?

The exhibit shows the details of VOL_A volume, including its IOPS allocations. The “Peak IOPS Allocation” is listed as “used-space,” and the “Expected IOPS” is 1000IOPS/TB. Since the size of VOL_A is 100GB (or 0.1TB), the expected IOPS would be 100, but it’s essential to consider that the “Absolute Minimum IOPS” is stated as 500IOPS/TB. However, since there’s no provided maximum limit in the exhibit, we can’t definitively state a maximum possible IOPS from this information alone. References :-The answer and explanation are inferred from the provided image as there’s no direct reference available in NetApp Data Administrator (ONTAP) documents and learning resources.

 The problem is that the NFS export policy only allows access to the IP range of 192.168.10.11-12, which does not include HOST 3’s IP address of 192.168.10.13. Therefore, the ESXi host cannot mount the NFS datastore. To solve the problem, you need to add HOST 3’s IP address to the NFS export policy, or modify the IP range to include it. This will grant the ESXi host the permission to access the NFS datastore. References :- ONTAP 9 Network Management Guide, ONTAP 9 NFS Reference, Troubleshooting NFS datastore connectivity issues (1003967)