H35-580_V2.0 Exam Questions Tutorials

According to the HCIA-5G V2.0 Exam Outline, base station receive diversity gain is a factor that affects uplink coverage, not downlink coverage. Downlink coverage is affected by factors such as downlink path loss, downlink transmit power, and antenna gain, which correspond to options B, C, and D.

According to the HCIA-5G V2.0 Exam Outline, SS-RSRP is the reference signal received power of the synchronization signal block (SSB) in NR systems. It can be used for measurement evaluation in idle mode during coverage problem analysis, which corresponds to option D. OPMI is an indicator of uplink interference power measurement, CSI-RSRP is the reference signal received power of the channel state information reference signal (CSI-RS), and SRS is the sounding reference signal. These indicators are used for measurement evaluation in connected mode, not idle mode, which correspond to options A, B, and C.

According to the BBU Quick Installation Guide (V100R005C10_04) (PDF)-EN, the UPEU in the BBU5900 needs to be connected to only one circuit breaker, not two. The UPEU is a universal power and environment interface unit that provides power supply and environment monitoring functions for other boards in a subrack. The UPEU converts -48 V DC to +12 V DC and distributes the power to other boards. The UPEU also collects alarms from the subrack and reports them to the main processing board. The UPEU can be installed in slot 0 or slot 10 of the BBU5900 subrack. The UPEU needs to be connected to a -48 V DC power cable that is connected to a circuit breaker in the cabinet. The circuit breaker must have a rated current of 16 A or higher. Therefore, the correct answer is B.

According to the 5G NR Downlink CSI Reporting, CSI-RS is the channel/signal that is used by the UE to measure and obtain the CQI. CSI-RS stands for Channel State Information Reference Signal, which is a downlink reference signal transmitted by the gNodeB to enable the UE to estimate the channel quality and feedback the CQI to the gNodeB. The CQI is an indicator of how good or bad the channel quality is, and it can be used by the gNodeB to adjust the modulation and coding scheme for data transmission.