Free Access VMware 2V0-41.23 New Release

According to the VMware NSX Documentation, these are the prerequisites for adding nodes to an NSX Management Cluster using the NSX UI:

• All nodes must be in the same subnet and have IP connectivity with each other.
• A compute manager must be configured and associated with the NSX Manager node.
• The NSX Manager node must have a valid license.
• The NSX Manager node must have a valid certificate.

https://docs.vmware.com/jp/VMware-NSX/4.1/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html

The correct answer is to enable the option All LB VIP Routes on the Tier-1 gateway route advertisement settings. This option allows the Tier-1 gateway to advertise the NSX Advanced Load Balancer LB VIP routes to the Tier-0 gateway and other peer routers, so that the end users can reach the production website by using the VIP address1. The other options are not relevant for this scenario.

To mark the correct answer by clicking on the image, you can click on the toggle switch next to All LB VIP Routes to turn it on. The switch should change from gray to blue, indicating that the option is enabled. See the image below for reference:

A group is a logical construct that represents a collection of objects in NSX, such as segments, segment ports, virtual machines, IP addresses, MAC addresses, tags, or security policies. A group can be used to define dynamic membership criteria based on various attributes or filters. A group can also be used as the scope of a distributed firewall rule, which means that the rule will apply to all the traffic that matches the group membership criteria32