Free 4A0-C04 Nokia Updates

An IGP route takes priority over a transport tunnel.

Both LDP and RSVP-TE based tunnels can be used.

MPLS tunnels can be used to resolve the prefixes learned via IGP.

Multiple MPLS tunnels can be installed in the FIB.

With the same method and attribute as 16-bit AS numbers.

With the same method as 16-bit AS numbers, but using the AS4_Aggregator attribute.

Aggregation is not yet supported with 32-bit AS numbers.

By using a dummy value of 23456 in the 16-bit AS aggregator field. This value lets the router know it needs to read the 32-bit AS number that is contained in the nextTLV.

A separate label is used for each interface on which the FEC is advertised.

A single label is assigned to a FEC for all interfaces on the same router,

It is typically used when the device has ATM or Frame Relay interfaces.

It uses more label resources than a per-interface label space.

The metric must be set accordingly for RIP

The subnet mask must be removed from the OSPF route

You must divide the cost of the OSPF route by three

The router must be configured as an ASBR