FCP_FAZ_AD-7.4 Leak Questions

FortiAnalyzer_7.0_Study_Guide-Online.pdf page 128: Are the device analytics logs required for reports in the new ADOM? If so, rebuild the new ADOM database

When the RAID status is Degraded, it typically indicates that one or more drives in the RAID array have failed or are missing, causing the RAID array to operate with reduced redundancy. In this state, the array is still functioning, but it's at risk because the fault tolerance provided by RAID is compromised.

When the upstream FortiGate is performing Network Address Translation (NAT), it creates new session entries for traffic passing through it. As a result, it generates its own traffic logs for those sessions, even if the sessions were initiated on a downstream FortiGate. This is because the upstream FortiGate is altering the source IP address, making it responsible for tracking the session details.

The management computer does not have connectivity to the authorization IP address and port combination.

If there is no network connectivity between the management computer and the FortiAnalyzer on the specific IP address and port used for authorization, the Security Fabric window will not open.

The fabric authorization settings on FortiAnalyzer are misconfigured.

If the fabric authorization settings on FortiAnalyzer are not properly configured, FortiGate will not be able to initiate the authorization request, preventing the Security Fabric window from opening.

The other options are not applicable because:

Pre-shared keys are not required for initial authorization between FortiGate and FortiAnalyzer; they are typically used for establishing VPN tunnels.

The Security Fabric root does not need to be added as a trusted host to open the authorization window. Trusted hosts are more relevant to FortiGate's access control for management interfaces.