Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: bigdisc65

F5-CA Changed 201 Questions

Page: 3 / 9
Question 12

A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.

Options:

A.

172.16.20.1:80

B.

172.16.20.2:80

C.

172.16.20.3:80

D.

172.16.20.4:80

E.

172.16.20.5:80

Question 13

Assume a BIG-IP has no NATs or SNATs configured. Which two scenarios are possible when client traffic arrives on a BIG-IP that is NOT destined to a self-IP? (Choose two.)

Options:

A.

If the destination of the traffic does not match a virtual server, the traffic will be discarded.

B.

If the destination of the traffic does not match a virtual server, the traffic will be forwarded based on routing tables.

C.

If the destination of the traffic matches a virtual server, the traffic will be processed per the virtual server definition.

D.

If the destination of the traffic matches a virtual server, the traffic will be forwarded, but it cannot be loadbalanced since no SNAT has been configured.

Question 14

Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

Options:

A.

Most templates, such as http and tcp, are as effective as customized monitors.

B.

Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.

C.

Most templates, such as https, should have the receive rule customized to make the monitor more robust.

D.

While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.

Question 15

A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at

their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

Options:

A.

200.200.1.1

B.

150.150.10.11

C.

Floating self IP address on VLAN where the packet leaves the system

D.

Floating self IP address on VLAN where the packet arrives on the system

Page: 3 / 9
Exam Code: 201
Exam Name: TMOS Administration
Last Update: Nov 21, 2024
Questions: 254
201 pdf

201 PDF

$28  $80
201 Engine

201 Testing Engine

$33.25  $95
201 PDF + Engine

201 PDF + Testing Engine

$45.5  $130