ECP-206 Leak Questions

Referring to the exhibit, the two Ericsson routers that support the 100GE interface are Router 6675 and Router 6672. The 100GE interface is a high-speed Ethernet interface that operates at 100 gigabits per second. The Ericsson Router 6000 series is a family ofrouters that provide IP transport for mobile and fixed networks. The Router 6675 is a 5G combined access and E-RAN switch with 100GE interfaces and 320Gb forwarding capacity. The Router 6672 is a high-capacity metro aggregation router with 100GE interfaces and 1.6Tb forwarding capacity12.

References: Router 6000 Series - Ericsson, New Ericsson Router 6000 series couples radio and IP transport for 5G future - Global Brands Magazine

The correct ordering (outer to inner) of packet headers in an IP/MPLS packet is Ethernet, MPLS, IP. An IP/MPLS packet is a packet that is encapsulated with an MPLS label stack between the Ethernet header and the IP header. The Ethernet header contains the source and destination MAC addresses and the EtherType field that indicates the type of the payload. The MPLS label stack contains one or more labels that are used for forwarding decisions by the MPLS routers. Each label consists of four fields: label value, experimental bits, bottom of stack, and time to live. The IP header contains the source and destination IP addresses and other information for routing and fragmentation. The order of the headers is important because it determines how the packet is processed by different devices in the network12.

References: MPLS Label Stack - Cisco, MPLS Fundamentals: 3 - MPLS Packet Forwarding

The correct order of DiffServ priority (highest to lowest) for the DiffServ classes: Default Forwarding (DF), Network Control (NC), Assured Forwarding (AF), and Expedited Forwarding (EF) is EF, NC, AF, DF. DiffServ is a QoS model that classifies and prioritizes traffic into different service classes based on the DSCP field in the IP header. The DSCP field is a 6-bit field that can encode up to 64 different per-hop behaviors (PHBs). The DiffServ classes are predefined groups of PHBs that have similar characteristics and requirements. The four main DiffServ classes are:

• EF: This class provides the highest priority and lowest delay for real-time applications such as voice and video. The DSCP value for EF is 101110 or 46 in decimal12.
• NC: This class provides the second highest priority and low delay for network control traffic such as routing protocols and network management. The DSCP value for NC is 110000 or 48 in decimal12.
• AF: This class provides four levels of assured forwarding with different drop probabilities for each level. AF is suitable for applications that require guaranteed bandwidth and delivery assurance, such as web browsing and email. The DSCP values for AF range from 001010 to 011110 or 10 to 46 in decimal12.
• DF: This class provides the lowest priority and best-effort service for applications that can tolerate packet loss and delay, such as file transfer and backup. The DSCP value for DF is 000000 or 0 in decimal12.

References: Differentiated Services - Wikipedia, DSCP - Differentiated Services Code Point - Mpirical

 IPv6 link-local addresses are designed to be used in three situations: for neighbor discovery, for local IP communication on the IPv6 capable routers, and for addressing on a single link for purposes such as auto-address configuration. Neighbor discovery is a protocol that allows IPv6 nodes to discover each other and learn their link-layer addresses on a local network. Neighbor discovery uses link-local addresses to send and receive messages such as router advertisements, router solicitations, neighbor advertisements, and neighbor solicitations34. Local IP communication on the IPv6 capable routers refers to the ability of routers to exchange routing information or management traffic using their link-local addresses as source and destination addresses. This reduces the need for global unicast addresses on router interfaces that are not reachable from outside the local network35. Addressing on a single link for purposes such as auto-address configuration refers to the use of link-local addresses to enable IPv6 nodes to obtain an address without manual configuration or a DHCP server. Link-local addresses can be automatically derived from the interface identifier in the modified EUI-64 format or randomly generated. Link-local addresses can also be used to test the connectivity of a link before obtaining a global unicast address36.

References: Understand the IPv6 Link-Local Address - Cisco, Link Local Address - GeeksforGeeks, IPv6 Address Types | Link-Local, Global Unicast, etc.⋆ IPCisco, MPLS Label Distribution Protocol Commands - Cisco