Download Latest CWNA-106 Questions

Page: 4 / 4

Question 16

What features are most often configurable within 802.11 WLAN client utilities? (Choose 2)

Options:

Frame generator utility

Power management

Co-channel interference threshold

Roaming aggressiveness

AES key and block size

Question 17

When planning an access point deployment that utilizes Power over Ethernet (PoE) switches at the network edge, what design decision could adversely affect the operation of 802.3-2012, Clause 33 APs?

Options:

All ports on the Ethernet switch will be supporting Class 3 PoE powered devices.

Some APs are connected to a PoE switch and are also receiving power from an AC outlet.

The Ethernet switch uplink ports are not connected to an 802.3-2012, Clause 33-compliant core or distribution Ethernet switch.

A gigabit Ethernet switch port supporting an 802.11a/g AP auto-negotiates to 100 Mbps.

The installation team is not informed that PoE support will reduce the recommended maximum UTP cabling length from 100m to 50m.

Question 18

You were previously onsite at XYZ’s facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are onsite again to perform a post-deployment validation survey.

When performing this type of post-deployment RF site survey for VoWiFi, what are two steps that must be performed? (Choose 2)