Download Latest 299-01 Questions

Lock the trace clip.

Send the trace clip packets to file.

Detach the trace clip from the capture job trace.

A and B

A, B, and C.

Manually configure the interface speeds on the Devices/Interfaces page.

Configure and enable SNMP access to the reporting devices on the Devices/Interfaces page.

Enable NBAR on the routers.

Check the "Interface Utilization" box under the Devices/Interfaces page for each router and/or Steelhead desired.

Configure the appropriate Device Interface Analytic.

From packets via the Cascade Sensor or Shark

From NetFlow and other standard flow protocols

From IP SLAs on any network-attached device

From CDP

From NBAR

To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by the way different Cascade Shark ports may see the same UDP/TCP sessions.

To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by use of the Aggregating Port seeing the same UDP/TCP sessions.

To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way Port Mirroring is configured on a switch.

To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way filtering is used on a capture job.

All of the above