CWNA Certification Changed CWNA-109 Questions

A BSS (Basic Service Set) is a WLAN use case that represents an 802.11-based network that uses an AP (Access Point) and has several connecting clients. The AP acts as a central point of coordination and communication for the clients, which can include iPhones, iPads, laptops, desktops, or any other devices that have Wi-Fi capabilities. A BSS can be identified by a unique BSSID (Basic Service Set Identifier), which is usually the MAC address of the AP’s radio interface. A BSS can also be associated with an SSID (Service Set Identifier), which is a human-readable name that identifies the network. References: , Chapter 1, page 23; , Section 1.1

DHCP (Dynamic Host Configuration Protocol) is a commonly used method to locate the controllers by the APs in a WLAN that is implemented using wireless controllers. DHCP is a protocol that allows a device to obtain an IP address and other network configuration parameters from a server. In a wireless controller scenario, the APs can use DHCP to request an IP address from a DHCP server, which can also provide the IP address or hostname of the wireless controller as an option in the DHCP response. This way, the APs can discover the wireless controller and establish a connection with it. Alternatively, the APs can also use other methods to locate the wireless controller, such as DNS (Domain Name System), broadcast or multicast discovery, or manual configuration. References: 1, Chapter 8, page 309; 2, Section 5.2

PoE has different standards that define different power levels for PSEs and PDs. The original standard, IEEE 802.3af, defines two classes of PSEs: Class 3 (15.4 W) and Class 4 (30 W). The newer standard, IEEE 802.3at, also known as PoE+, defines four classes of PSEs: Class 0 (15.4 W), Class 1 (4 W), Class 2 (7 W), and Class 3 (12.95 W). The power level received at the PD is always lower than the power level provided by the PSE, due to cable resistance and power dissipation. The IEEE standards specify the minimum power level that must be received at the PD for each class of PSE. For a Class 4 PSE, the minimum power level received at the PD is 25.5 W910. References: CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 295; CWNA-109Study Guide, Chapter 7: Power over Ethernet (PoE), page 289.

An advantage of using WPA3-Personal instead of WPA2-Personal as a security solution for 802.11 networks is that WPA3-Personal, also called WPA3-SAE, uses a stronger authentication exchange to better secure the network. WPA3-Personal uses Simultaneous Authentication of Equals (SAE) as the key exchange protocol, which provides stronger protection against offline dictionary attacks and password guessing than WPA2-Personal. SAE uses a Diffie-Hellman key exchange with elliptic curve cryptography (ECC) to establish a pairwise master key (PMK) between the AP and the client without revealing it to any eavesdropper. SAE also provides forward secrecy, which means that if one PMK is compromised, it does not affect the security of other PMKs. WPA2-Personal uses Pre-Shared Key (PSK) as the key exchangeprotocol, which is vulnerable to offline brute-force attacks if the passphrase is weak or leaked. Both WPA3-Personal and WPA2-Personal use AES for encryption, so there is no difference in that aspect. WPA3-Personal does not use a different encryption algorithm than WPA2-Personal, but rather a different key exchange protocol. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 307; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 297.