CPIM CPIM-8.0 Book

A cellular production system is a type of lean manufacturing system that reduces waste and improves efficiency by grouping machines and workers into cells that can produce a complete product or a product family. A pull production activity control (PAC) technique is most appropriate for a cellular production system because it allows the cells to produce only what is needed by the downstream processes or customers, thus minimizing inventory and overproduction. A pull PAC technique also enables quick response to changes in demand and feedback from quality control. A push PAC technique, on the other hand, is based on predetermined schedules and forecasts, which may not match the actual demand and may result in excess inventory and waste. The shortest processing time (SPT) rule and the distribution requirements planning (DRP) are not specific to cellular production systems and do not take into account the customer demand or the cell capacity. References:

•CPIM Part 2 Exam Content Manual, p. 49

•Cellular Manufacturing: A Comprehensive Guide

•Cellular manufacturing - Wikipedia

Work-in-process (WIP) cost is the total cost of the units that are partially completed in the production process. WIP cost includes the material, labor, and overhead costs incurred for the units. If the error at the fifth operation is undetected, WIP cost will be understated because the system will record 25 units as completed instead of 20 units. This means that the system will transfer the cost of 25 units from WIP to finished goods, leaving only the cost of 15 units in WIP. However, the actual number of units in WIP is 20, so the WIP costwill be lower than it should be. The other conditions will not be true if the error is undetected. Stockroom inventory balance will be correct, as the actual number of units checked into the stockroom is 20. Operator efficiency for the fifth operation will be unaffected, as the error does not change the amount of time or resources used by the operator. Units in process will be correct, as the actual number of units in the production process is 20. References: Work in Process (WIP) | APICS Dictionary Term of the Day, APICS CPIM 8 Planning and Inventory Management | ASCM

Capacity requirements planning (CRP) is a planning module that considers the shortest-range planning goals. CRP is a process of determining the amount of available capacity and comparing it with the required capacity to execute the planned orders in the master production schedule (MPS) and the material requirements planning (MRP). CRP is usually done at the work center level and for a time horizon of a few weeks or months. CRP helps to identify and resolve capacity issues, such as overloads or underloads, and to adjust the production plan accordingly. CRP is the most detailed and accurate method of capacity planning, as it considers the actual routings, lead times, and lot sizes of the orders. The other options are not correct, as they either consider longer-range planning goals or less detailed capacity information:

•Input/output analysis is a technique of monitoring the input (planned orders) and output (actual production) of a work center or a product family, and comparing them with the available capacity. Input/output analysis is usually done at the aggregate level and for a time horizon of a few months or quarters. Input/output analysis helps to measure the performance of the production plan and to identify and correct deviations from the plan.

•Resource planning is a process of determining the long-range capacity requirements for labor, equipment, facilities, and other resources, based on the sales and operations plan (S&OP). Resource planning is usually done at the aggregate level and for a time horizon of a few years. Resource planning helps to support the strategic decisions and investments related to the resource capacity.

•Rough-cut capacity planning (RCCP) is a process of verifying the feasibility of the master production schedule (MPS) in terms of the available capacity of critical resources, such as key machines or labor skills. RCCP is usually done at the product family level and for a time horizon of a few months or quarters. RCCP helps to validate the MPS and to identify and resolve potential capacity bottlenecks or gaps. References:

•[CPIM Part 2 - Section A - Topic 2 - Capacity Planning]

•Capacity Requirements Planning (CRP)

•Input/Output Control

•Resource Planning

•Rough Cut Capacity Planning (RCCP)

In a lean environment, the batch-size decision for planning “A” items would be done by lot-for-lot (L4L). L4L is an inventory management technique that orders exactly the quantity needed to meet the demand for each period. This minimizes the work in process, cycle time, and inventory holding costs. L4L is consistent with the lean principles of reducing batch sizes, eliminating waste, and responding to customer pull. The other options are not suitable for a lean environment, as they either order more than the demand (least total cost, min-max system, periodic order quantity) or incur more setup costs (least total cost, periodic order quantity). References:

•[CPIM Part 2 - Section A - Topic 3 - Lean and Just-in-Time]

•Optimize Production Batch Sizes

•How to determine your Lot Size - Part 1