CompTIA Server+ SK0-005 Passing Score

The backplane is a circuit board that connects multiple hard drives to a RAID controller and provides power and data transfer between them. If the backplane has failed, it may cause all the hard drives to be offline and prevent the server from booting into the OS. The fact that replacing one of the drives with a known-good drive did not work, and that taking a drive out of the server and placing it in a spare server made it functional, suggests that the problem is not with the drives themselves but with the backplane. A corrupt kernel (A) would not affect the status of the hard drives, as it is a software component of the OS. Resource misallocation (B) would not cause all the hard drives to be offline, as it is a configuration issue that affects how resources are assigned to processes or applications. Reseating the drives (D) would not help, as it would not fix a faulty backplane. References: https://www.dell.com/support/kbdoc/en-us/000130114/how-to-troubleshoot-a-faulty-backplane

The RAID level that provides the highest possible capacity for a storage array is RAID 0. RAID 0 is a type of RAID level that provides performance enhancement by using striping. Striping means dividing data into blocks and distributing them across multiple disks to increase speed and capacity. RAID 0 does not provide any fault tolerance or redundancy, as it does not use any parity or mirroring techniques. RAID 0 uses all of the available disk space for data storage, without losing any space for overhead. Therefore, RAID 0 provides the highest possible capacity for a storage array, but also has the highest risk of data loss.

The technician should boot from the media to install the firmware on the server. Firmware is a type of software that controls the low-level functions of hardware devices, such as BIOS (Basic Input/Output System), RAID controllers, network cards, etc. Firmware updates are often provided by hardware manufacturers to fix bugs, improve performance, or add new features to their devices. To install firmware updates on a server, the technician needs to boot from a media device (such as a CD-ROM, DVD-ROM, USB flash drive, etc.) that contains the firmware files and installation program. The technician cannot install firmware updates from within the operating system because firmware updates often require restarting or resetting the hardware devices.

RAID 10 is the RAID level that will yield the best combination of available space and redundancy when configuring a new server for use as a database server with two mirrored drives for the operating system and three drive bays remaining for storage. RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved. RAID 10 provides high performance, fault tolerance, and fast recovery, but it reduces storage capacity by half. RAID 0 is a RAID configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 1 is a RAID configuration that duplicates data across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 5 is a RAID configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive’s worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. References: https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/ https://www.howtogeek.com/202794/wh at-is-the-difference-between-127.0.0.1-and-0.0.0.0/