Changed JN0-231 Exam Questions

https://www.juniper.net/documentation/en_US/day-one-books/nat-and-pat-en.html

And the specific text that would support the above answer is as follows: "Static NAT, which requires manual configuration, is often the most appropriate configuration for mapping one internal address to one external address."

The main purpose of using screens on an SRX Series device is to provide protection against common Denial of Service (DoS) attacks. Screens help prevent network resources from being exhausted or unavailable by filtering or blocking network traffic based on predefined rules. The screens are implemented as part of the firewall function on the SRX Series device, and they help protect against various types of DoS attacks, such as TCP SYN floods, ICMP floods, and UDP floods.

Network Prefixes in Address Books

You can specify addresses as network prefixes in the prefix/length format. For example, 203.0.113.0/24 is an acceptable address book address because it translates to a network prefix. However, 203.0.113.4/24 is not acceptable for an address book because it exceeds the subnet length of 24 bits. Everything beyond the subnet length must be entered as 0 (zero). In special scenarios, you can enter a hostname because it can use the full 32-bit address length.

https://www.junipe r.net/documentation/us/en/software/junos/security-policies/topics/topic-map/security-address-books-sets.html

J-Web is a web-based interface for configuring and managing Juniper devices. The management and loopback address configuration option in J-Web allows you to configure the IP address of the device management port, which is used to remotely access and manage the device.