Changed 300-410 Exam Questions

Configure transport input ssh on line vty and remove sequence 30 from access list 100.

Configure transport output ssh on line vty and remove sequence 20 from access list 100.

Remove class-map ANY from service-policy CoPP

Configure transport output ssh on line vty and remove sequence 10 from access list 199.

Remove sequence 10 from access list 100 and add sequence 20 deny tcp any any eq telnet to access list 199

The SSH service must be enabled with the crypto key generate rsa command.

The SCP service must be enabled with the ip scp server enable command.

The Python interpreter must first be enabled with the guestshell enable command.

The SSH access must be allowed on the VTY lines using the transport input ssh command.

route-mmap SETLP permit 10

match ip address prefix-list PLIST1

set local-preference 99

route-map SETLP permit 20

route-map SETLP permit 10

match ip address prefix-list PLIST1

set local-preference 110

route-map SETLP permit 20

router bgp 111

no neighbor 192.168.10.1 route-map SETLP in

neighbor 192.168.10.1 route-map SETLP out

router bap 111

no neighbor 192.168.10.1 route-map SETLP in

neighbor 192.168.20.2 route-map SE TLP in

Modify the CoPP policy to increase the configured exceeded limit for SNMP.

Modify the access list to include snmptrap.

Modify the CoPP policy to increase the configured CIR limit for SNMP.

Modify the access list to add a second line to allow udp any any eq snmp