1z0-404 Exam Questions Tutorials

Select the element and then issue the show command.

Type show .

Type show ? and select from the displayed list.

Type is –a.

Enter the name of the element and then issue the show command.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to realm-prefix.

Navigate to the session-agent configuration element and set the ip-address parameter to the IP address of your trusted User Agent (UA).

Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to all.

Navigate to the realm-config configuration element and set the addr-prefix parameter to the IP subnet of your trusted User Agents (UAs).

A phy-interface element must be configured for each interface used for High Availability (HA) heartbeats, but not for signaling and/or media.

After configuring a phy-interface configuration element for signaling and/or media, a reboot of the Session Border Controller is required.

A phy-interface configuration element must be configured for each interface used.

A unique phy-interface configuration element is created for all signaling/media interfaces.

A phy-interface configuration element for signaling and/or media has the operation-type parameter set to control.