DES-5221 Exam Dumps - EMC DCS-IE Datacenter Networking Questions and Answers

S3(config-router-ospf-1)# show ip ospf database

S3(config-router-ospf-1)# show ip ospf topology

S3(config-router-ospf-1)# show ip ospf lsa

S3(config-router-ospf-1)# show ip ospf statistics

OSPF must install equal cost paths in the routing table for BGP to use ECMP.

Maximum-paths and multipath-relax commands.

Sub-interfaces must be configured on the physical interface running BGP.

ECMP is not possible in BGP.

OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport

OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0

OS10(config)# router ospf1

OS10(config)# router ospf 1

OS10(config-router-ospf-1)# router-id 1.1.1.1 OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0

OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown

OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport

OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf 1

OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown

OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport

OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(conf-if-eth1/1/3)# router ospf 1

Configure a management route

Remove the default route

Remove all configured settings

Configure an IP Address

36

12

48

24

Deletes all the text before the cursor.

Moves the cursor to the start of the command line.

Moves the cursor to the end of the command line.

Deletes the word before the cursor.

6

9

3

12

1-6400

0-61440

0-614400

1-64

802.3af

802.3ad

802.3ac

802.3ae