D-PEXE-IN-A-00 Exam Dumps - EMC Servers Questions and Answers

Unpack the server from the shipping packaging.

Install the rail assembly.

Transport the server and align with the rack.

Slide the server into the rack.

Connect the power and network cables.

Power on the server.

Unpack the server from the shipping packaging:

Carefully remove the XE9680 server from its shipping packaging. Inspect the server for any visible damage and verify that all components are included as per the packing list.

Install the rail assembly:

Install the rail assemblies into the rack. Follow the instructions provided in the server's installation guide to ensure the rails are securely and correctly mounted in the rack.

Transport the server and align with the rack:

Use a server lift or appropriate equipment to transport the server to the installation site. Align the server's inner rails with the rail assemblies in the rack to prepare for sliding the server into place.

Slide the server into the rack:

Carefully slide the server into the rack along the installed rail assemblies. Ensure it is properly seated and locked into place as per the installation guidelines.

Connect the power and network cables:

Connect the server's power supply units (PSUs) to the appropriate power distribution units (PDUs) in the rack. Connect the necessary network cables to the server's network ports.

Power on the server:

After ensuring all connections are secure, power on the server. Monitor the server’s boot process and ensure it starts up correctly without any errors.

References:

Dell EMC PowerEdge XE9680 Installation and Service Manual: This manual provides detailed step-by-step instructions on unpacking, installing, and powering on the server.

Dell EMC Technical Specifications Guide: Offers comprehensive details on the hardware specifications and installation procedures for Dell PowerEdge servers.

Understanding Stab-in Rails:

Stab-in rails are designed to simplify the server installation process. These rails enable a quick and straightforward installation of the server into the rack.

Compatibility and Usage:

Stab-in rails are specifically designed for use in 4-post racks with square holes. This compatibility ensures stability and proper fitting within the rack structure.

Installation Process:

Before initiating the installation, verify that the rack is a 4-post, square hole type.

Position the stab-in rails to align with the square holes on the rack. Typically, stab-in rails have tabs that fit precisely into these square holes.

Mounting the Server:

Once the rails are securely attached to the rack, the server can be mounted. The design of the stab-in rails facilitates a smooth insertion of the server, ensuring it is securely held in place.

Ensuring Proper Fit:

After the server is mounted, check to ensure that it is level and securely attached. This step is crucial to prevent any movement or displacement that could occur due to vibrations or physical disturbances.

References:

Dell EMC PowerEdge XE9680 and XE8640 Installation and Service Manual: This manual provides detailed instructions on the use and installation of stab-in rails, including compatibility with specific rack types.

Dell EMC Technical Specifications Guide: Offers comprehensive specifications and compatibility information for different mounting and installation hardware used with Dell PowerEdge servers.

To ensure the correct server rails are on-site for the installation of PowerEdge XE servers, it’s essential to match the server model with the appropriate rail type. Based on the Dell Enterprise Systems Rail Sizing and Rack Compatibility Matrix, the following matches are correct:

XE9680 and B25: The XE9680 server is compatible with the B25 rail type, which is designed to support the size and weight of this particular server model1.

XE9640 and B25: Similarly, the XE9640 server can also utilize the B25 rail type for secure mounting in a rack1.

XE9680 and B28: Additionally, the XE9680 server is compatible with the B28 rail type, providing an alternative mounting solution1.

It’s important to note that the rail types are specific to the server models and are designed to ensure a secure and stable installation in the customer’s rack. The Dell Rail Sizing and Rack Compatibility Matrix provides detailed information on the compatibility of different server models with their respective rail types. This document should be consulted to verify the correct rail type for each server model before proceeding with the installation1.

Server Dimensions and Rack Compatibility:

The Dell PowerEdge XE9680 is a large server with specific dimensional requirements. Ensuring that the customer’s rack can accommodate the physical length and depth of the server is crucial for a successful installation.

Rack Depth and Space Requirements:

Measure the depth of the customer’s rack to ensure it is sufficient to house the XE9680 servers. The server’s dimensions, including its length, should be verified against the available space in the rack.

Server Length Specification:

The PowerEdge XE9680 has a significant depth, typically around 800mm (31.5 inches). The rack must be deep enough to support the full length of the server, including any cable management and airflow requirements.

Checking Rack Specifications:

Verify that the rack adheres to standard dimensions suitable for hosting enterprise-grade servers. Ensure that the rack has appropriate mounting options, such as square or threaded holes compatible with the server’s rail kit.

Pre-installation Verification:

Before arriving on-site, confirm with the customer that their rack meets the necessary specifications. This includes checking for sufficient clearance at the rear for cable connections and at the front for proper airflow.

Importance of Proper Fit:

A rack that cannot accommodate the length of the servers will result in installation failure, potential damage to the hardware, and inefficient cooling. It may also pose safety risks during and after installation.

References and Documentation:

The Dell EMC PowerEdge XE9680 Installation and Service Manual provides detailed information on the server’s dimensions and the necessary rack specifications. This manual should be consulted to ensure all pre-installation requirements are met.

References:

Dell EMC PowerEdge XE9680 Installation and Service Manual: This manual provides comprehensive guidelines on the server’s physical dimensions and the necessary rack specifications for proper installation.

Dell EMC Technical Specifications Guide: Offers detailed specifications and requirements for rack compatibility and server installation procedures.