Authentic Fortinet Certification Exam NSE7_ZTA-7.2 Questions Answers

 In the context of zero-trust telemetry compliance, the three true statements are:

• A. FortiClient EMS creates dynamic policies using ZTNA tags: FortiClient EMS utilizes ZTNA (Zero Trust Network Access) tags to create dynamic policies based on the telemetry it receives from endpoints.
• B. FortiClient checks the endpoint using the ZTNA tags provided by FortiClient EMS: FortiClient on the endpoint uses the ZTNA tags from FortiClient EMS to determine compliance with the specified security policies.
• D. FortiOS provides network access to the endpoint based on the zero-trust tagging rules: FortiOS, the operating system running on FortiGate devices, uses the zero-trust tagging rules to make decisions on network access for endpoints.

The other options are not accurate in this context:

• C. ZTNA tags are configured in FortiClient, based on criteria such as certificates and the logged-in domain: ZTNA tags are typically configured and managed in FortiClient EMS, not directly in FortiClient.
• E. FortiClient EMS sends the endpoint information received through FortiClient Telemetry to FortiOS: While FortiClient EMS does process telemetry data, the direct sending of endpoint information to FortiOS is not typically described in this manner.

References:

• Zero Trust Telemetry in Fortinet Solutions.
• FortiClient EMS and FortiOS Integration for ZTNA.

FortiNAC uses a variety of methods to identify devices on the network, such as Vendor OUI, DHCP fingerprinting, and device profiling12. One of the supported communication methods that FortiNAC uses for initial device identification during discovery is SNMP (Simple Network Management Protocol)3. SNMP is a protocol that allows network devices to exchange information and monitor their status4. FortiNAC can use SNMP to read information from switches and routers, such as MAC addresses, IP addresses, VLANs, and port status3. SNMP can also be used to configure network devices and enforce policies4. References: 1: Identification | FortiNAC 9.4.0 - Fortinet Documentation 2: Device profiling process | FortiNAC8.3.0 | Fortinet Document Library 3: Using FortiNAC to identify medical devices - James Pratt 4: How does FortiNAC identify a new device on the network?

When FortiClient EMS is configured as an MDM connector on FortiNAC, it allows FortiNAC to obtain host information from FortiClient EMS and use it for network access control. FortiNAC polls FortiClient EMS periodically (every 5 minutes by default) to update already registered hosts in FortiNAC. This ensures that FortiNAC has the latest host data from FortiClient EMS, such as device type, OS, IP address, MAC address, hostname, and FortiClient version. FortiNAC can also use FortiClient EMS as an authentication source for devices that have FortiClient installed. FortiNAC does not send any data to FortiClient EMS or check for device vulnerabilities and compliance with FortiClient123. References := 1: MDM Service Connectors | FortiClient EMS Integration 2: FortiClient EMS Device Integration|FortiNAC 9.4.0 - Fortinet Documentation 3: Technical Tip: Integration with FortiClient EMS