Authentic VMware Certification Exam 5V0-22.23 Questions Answers

The correct answer is B, check VMKNICs, uplinks, physical switches, and associated settings. This is because the VMware Skyline Health: Network Latency Check reports the network latency between vSAN hosts and displays the network latency in real time. Failure indicates that the network latency is above the normal threshold, which can affect the performance and availability of vSAN. The network latency can be caused by various factors, such as misconfiguration, congestion, or errors in the network components. The vSAN administrator should check the VMKNICs, uplinks, physical switches, and associated settings for any issues and resolve them accordingly. The vSAN administrator can also use tools such as vmkping or esxtop to test the network connectivity and performance between hosts. The other options are incorrect for the following reasons:

• A, immediately reboot the non-compliant hosts, is incorrect because rebooting the non-compliant hosts is not a recommended action and can cause more disruption and data loss than resolving the network issue. Rebooting the hosts will also trigger a resynchronization of data across the cluster, which can affect the performance and availability of vSAN.
• C, rerun the VMware Skyline Health: vSAN Cluster Partition report, is incorrect because rerunning the VMware Skyline Health: vSAN Cluster Partition report will not help to resolve the network latency issue. The vSAN Cluster Partition report checks if there are any network partitions in the cluster that prevent communication between hosts. The network partition can be caused by network latency, but it is not the same as network latency. The vSAN administrator should first fix the network latency issue before checking for any network partitions.
• D, place the non-compliant hosts into an isolated network partition, is incorrect because placing the non-compliant hosts into an isolated network partition will not help to resolve the network latency issue. It will also cause more problemsfor vSAN, such as data inconsistency, reduced redundancy, and degraded performance. The vSAN administrator should avoid creating any network partitions in the cluster and ensure that all hosts can communicate with each other. References:
• VMware vSAN Specialist v2 Exam Preparation Guide, page 9
• Network Health - Network Latency Check (2149511)

An all-flash vSAN ESA cluster with four nodes can satisfy the storage policies that require FTT=2 (RAID-1 Mirroring) or FTT=2 (RAID-6 Erasure Coding). These policies mean that the cluster can tolerate two host failures while maintaining data availability and redundancy. RAID-1 Mirroring creates three replicas of each object across different hosts, while RAID-6 Erasure Coding splits each object into four data segments and two parity segments across different hosts. Both policies require at least four hosts in the cluster to meet the FTT=2 requirement. The other options are not correct. An all-flash vSAN ESA cluster with four nodes cannot satisfy the storage policies that require FTT=3 (RAID-1 Mirroring) or FTT=1 (RAID-5 Erasure Coding). These policies mean that the cluster can tolerate three or one host failure respectively, but they require more or less hosts than four to do so. RAID-1 Mirroring with FTT=3 requires at least six hosts in the cluster to create four replicas of each object, while RAID-5 Erasure Coding with FTT=1 requires at least three hosts in the cluster to split each object into two data segments and one parity segment. References: vSAN Express Storage Architecture; RAID Configurations, FTT, and Host Requirements

The Skyline Health interval validates online if there are new Health Checks available for vSAN every 24 hours. This means that vSAN checks for new health checks from VMware Analytics Cloud once a day and updates the vSAN Health Service accordingly. The other options are not correct, as they do not match the actual frequency of the online validation. References: About the vSAN Skyline Health